Loading...
Servinox Safety Equipment2018-08-23T11:42:09+00:00

Servinox Safety Equipment

8
No
Detail
Detail
None
1
24
enter code
/servinox-safety-equipment/
Detail
BOG
Size:
Pressure:
Size Range: 400mm or smaller
HSV-A
Size:
Pressure:
Size Range: 400mm or smaller
BOG
Code: BOG
Description:
Pressure, Vacuum-relief and gas collection safety valve for inerted tanks BOG
BOG safety valves are intended to protect low pressure tanks not covered by PED against vacuums (Vacuum breaker) and/or excess pressure. Depending on the version, the valve blow-off can be collected.
Key Benefits:
- Fully autonomous (no external control required for its operation)
- Different models available according to requirements: pressure / vacuum (with or without blow-off collection), Pressure only (with or without blow-off collection) , Vacuum only.
- Safety valves compatible with hot/cold washing (after validation by the validation tool)
- Simplified and cost effective maintenance
- Low pressure sealing
- Hygienic design
- Freeze protection option on request
Technical Data: See download document
Applications:
- Manufacture and storage of food and non-food products in a controlled atmosphere (dairy products, beverages, waters, creams and other cosmetic products, fine chemicals, etc.)
- Tanks not covered by PED, where the service pressure is less than 0.5 bar and the service temperature is less than 120 °C
- Exclusively designed to transport gases
Size:
Pressure:
Size Range: 400mm or smaller
HSV-A
Code: HSV-A
Description:
Pressure, Vacuum-relief & thermal shock safety valve 3A HSV-A
The valves in the HSV range are hygienic equipment intended to protect tanks against vacuums (vacuum breaker) and/or excess pressure. They are fitted with a technical tube (washing function, sterile air intake). The pressurised function blow-off is collected. The passage sections, different for pressure and vacuum, are specifically designed to protect the tanks against sudden temperature variations resulting from hot washing (and SIP) followed by a cold rinse.
SERVINOX possesses design tools to dimension a valve with respect to tank characteristics (diameter, height), resistance (pressure and vacuum) and washing conditions (temperature, flow-rate).
Key Benefits:
- Valve certified 3-A 58-01
- Combined pressure and vacuum
- Specially designed for protection against thermal shocks (hot/cold washes)
- Fully autonomous (no external control required for its operation)
- Hygienic design - Simplified and cost-effective maintenance (with no lifting or special tools)
- Numerous options available according to requirements
Technical data: See download document
Applications:
- Tanks not subject to PED compliance where the service pressure is less than 0.5 bar
- Tanks subject to PED compliance where the service pressure is more than 0.5 bar (special version available on option)
- Tanks where the service temperature does not exceed 120 °C
- Exclusively designed to transport gases
Size:
Pressure:
Size Range: 400mm or smaller
BOG
Code: BOG Description: Pressure, Vacuum-relief and gas collection safety valve for inerted tanks BOG BOG safety valves are intended to protect low pressure tanks not covered by PED again... Read More
Size:
Pressure:
Size Range: 400mm or smaller
HSV-A
Code: HSV-A Description: Pressure, Vacuum-relief & thermal shock safety valve 3A HSV-A The valves in the HSV range are hygienic equipment intended to protect tanks against vacuums (vacuum... Read More
Size:
Pressure:
Size Range: 400mm or smaller